Digatron 64K RE2 series kit includes the following channels RPM-EGT-EGT w/ Recording!
Rugged and dependable Digatron's performance data acquisition systems offer advantages for both the racer and recreational user.
Use these systems to simply monitor your engine and obtain your maximum readings or utilize their full capacity by replaying engine information on the instrument or downloading to your P.C..Whether you are looking for peak engine performance, or a system to monitor engine modifications the 64 series instruments can accomplish this!
Large easy-to-read display and full datalogging make this series the ideal tool for monitoring and tuning your vehicle. Red LED lights serve as an ideal engine warning system. A full 4 hours of circular recording means you always have your most current data to review.
64K Series Kit Includes :
- 64K Instrument
- Tach Harness/ w/ "AA" Batteries built -in(Inductive or Square Wave)
- (2)Stinger EGT Sensors (48" or 72" Length w/Clamp or Weld-on mounting)
- Mounting Bracket
- Instrument Manual
64K Series Kit Features :
- Configurable Bus port for future expansion
- Screen Backlighting
- Small lightweight Billet Design
- All functions recorded 20 times a second
- Maximums for all functions displayed when the engine turns off
- Minimum reading of engine RPM and Jackshaft RPM
- Configurable readings (Fahrenheit or Celsius / MPH or KPH)
- Over or under limit warning lights
- Total engine usage time
- Barometric Pressure Sensor
- Configurable display
- Instrument Dimensions are 5.0"L X 2.75"H X .500"W (.875" Including connectors)
- LCD dimensions / 4.1875"L X 1.50”H
- Alarms w/ Lights on all inputs
- Auto Turn On, with 290 minutes of memory @ 20 samples per second
- 2 YEAR WARRANTY on the instrument (2) year on the EGT sensors
- Data Download "Optional" add $75.00
Add The Following Options: See 64 Series Accessories section to add to your order!(additional cost)
(Exchange/Swap out or ADD Temp Channels / 4 Temp Channels Max)
- EGT Sensor Clamp-on(Part# EG72STC-C)
- EGT Sensor Weld-on(Part# EG72WOTC-C)
- CHT sensor (Part# CH60TTC-C)
- Fuel Tester Sensor (Part# FT-BUS)
- Water Temperature Sensor(Part#WT60KQTC-D)
- Oil Temperature Sensor (UT60THPTC-C)
- Air Temperature Sensor (UT60THPTC-C)
- MPH /Jackshaft RPM Sensor (specify shaft size)(Part# MP60KTC-D)
- Lap Timing Beacon Transmitter (Part#BT-A)
- Lap Timing Receiver (Part#BR36KTCTC)(Infrared or Magnetic)
- Fluid Pressure Sensor 0-150PSI (Part#OP-150S)
This instrument has thermocouple temperature functions. Either a CHT, EGT or Water Temperature sensor can be connected to a temperature function on the gauge. The limit entered in the instrument will determine if the instrument displays CHT or EGT.
If a temperature sensor is not used in a specific channel the factory will include the shorting plug that can later be removed by the user to upgrade to a extra temperature channel.
We offer a large variety of instruments, accessories and options. We encourage you to call us with any questions regarding our products.
Tech Assistance: (1-800-348-4678 Toll Free or 1-909-548-8100)
**Sensors can be ordered at any requested length. (Additional custom length fees apply) |
Contact
Us
DT-64K RE2 
3 LBS.
